Sentence examples for a circular profile from inspiring English sources

The asymmetric compound parabolic collector that combines the configuration of compound parabolic collector, a circular profile, and flat plate collector has the unique advantage of heating the absorber plate from both above and below.

In this study, an isotherm heat transfer system has been designed and built in order to investigate the effect of utilizing water/graphene oxide nanofluid flow on heat transfer and the friction coefficient in a circular profile copper tube.

The 70 and 90 mm grating width domes were 15.5 cm in diameter to maintain a circular profile.

The ion beam emerging from the interface has a circular profile which requires a tunable quadrupole lens, efficiently changing it to a rectangular shape.

While P. walkeri and P. tubicen had long crests with only slight curvature, P. cyrtocristatus had a short crest with a more circular profile.

Because of a singularity in the governing one-dimensional heat diffusion equation for a fin with circular profile, no exact solution is possible for the circular heat sink geometry.

This analysis revealed a markedly disturbed cytoskeletal organization in miR-142−/− MKs compared to WT counterparts and mutant cells displayed a more immature circular profile than WT counterparts.

For example, one learns that a continuous sequence of projective transformation (e.g., the circular profile of a dinner plate seems to become elliptical) is associated with changing positions of the object in view, or that continuous symmetrical expansion of the retinal image is associated with approach.

The methods were found to be accurate to within a few millimeters when measuring 58 mm of diametric difference over an 18.3 m diameter circular profile, even when some sections of the data were removed from the analysis.

SSEST proposed can be used to remove the spatial rotation error of an instrument spindle from the measurement results by first measuring the circular profile of a workpiece at i sections and rotating the workpiece through a small angle, then measuring the circular profile of the workpiece after rotation, and finally analyzing and processing the circular profiles.

Figure 3C shows the circular profile of a round channel from the diced edge of a chip; its diameter (380 400 μm) matched the outer diameter (o.d).