Sentence examples for a characteristic strength from inspiring English sources
A two-parameter model with a characteristic toughness and a characteristic strength can be used to predict the fracture of notched or cracked specimens.
The wires exhibit a tensile strength of 675 894 MPa with a characteristic strength of 817 MPa and a Weibull modulus of 20.6.
In light of the present findings, the mixed recycled aggregates used in this research may be deemed apt for use in structural concrete with a characteristic strength of up to 30 MPa.
To prevent a premature debonding failure of the strengthening system, the criteria specify a maximum principle stress in the adhesive which cannot be exceeded for a given characteristic strength of an adhesive.
A key finding is that the proposed reduction factor of 0.6 in a forthcoming American LRFD standard to calculate a thread characteristic strength from the plain value is acceptable.
This paper deals with compressive strength, porosity and sorptivity characteristics of commercially available ultra fine slag based high strength concrete (HSC) (with a characteristic compressive strength of 50 MPa).
As-welded samples showed a mean fatigue strength of 353 MPa and a characteristic fatigue strength of 306 MPa.
According to fib Model Code 2010, it is recommended that lightweight aggregate concrete for structural applications have a density in the range 800 2000 kg/m3, and high strength concrete is typically accepted to have a characteristic compressive strength greater than 50 MPa (Fib 2012).
Biaxial strength measurements using the ball-on-three-balls method performed at room temperature in water (as reference environment) showed a clear increase in the characteristic strength with the compressive residual stress in the surface layer.
This technical note employs system reliability methods to determine the characteristic strength of an in situ composite system consisting of 2 25 laminae.
With an accurately fitting of geometric parameters and end pressure, the characteristic strength reached 76 N/mm2 indicating a possible strength class GL48c or even higher.
