Your English writing platform
Discover LudwigExact(1)
For example, when γ ps =5 and d i0=100 m (see Figures 9a and 10a), a capacity value of around 2 is obtained when d r0 changes from 48 to 67 m for β=0 while for the same nonzero capacity value d r0 changes from 58 to 66 m when (beta = frac {pi }{3}).
Similar(59)
The NC-EEG nanocomposites exhibited a high capacity value of 649 C g−1 at a current density of 1.0 A g−1.
This response corresponds to a system with perfectly orthogonal MIMO subchannels, and the capacity of the MIMO channel is then equivalent to that of n r independent SISO channels given as follows: C max=n r log2(1+ρ), C max corresponds to a maximum capacity value of 13.32 bps/Hz for a 2×2 MIMO system.
For example, Deng et al. [19] reported a discharge capacity value of around 502 mAh g−1 with a current density of 31.25 mA g−1 at 333 K for the La1−x Sr x FeO3 (for x = 0.4) oxide electrode, which is considerably much higher than that reported for the undoped LaFeO3 and AB5 alloys [5, 6, 13].
Co0.50Ti2(PO4)3 is characterized by a high capacity value of 183.85 mAh/g after the first discharge at 1.6 V which is above the theoretical capacity for Ti4+/Ti3+ reduction.
A maximum capacity value of 1030 mA h g−1 was found during the first discharge, and capacity values higher than 400 mA h g−1 were still achieved after 10 cycles.
At the end of the second cycle, Li(Co1/6Mn11/6 O4 compound delivers a discharge capacity value of 100 (±3) and 87 (±3) mAh g−1 for the current rate of 2 and 5C, respectively.
The adsorption equilibrium data was well fitted with the Freundlich isotherm model with a maximum adsorption capacity value of 14.8 mg/g.
The prepared membrane showed an ion-exchange capacity value of 0.76 mmol g−1dry membrane and ionic conductivity of 7.5 S m−1 at 30 °C.
(9) m b ∫ 25 158 (0.00004 T 2 − 0.0015 T + 0.9325 ) ⅆ T Alternatively, the energy required for heating the sulphuric acid was calculated using the last term in Equation (4) with an average specific heat capacity value of 1.34 kJ kg−1 °C−1 [24] and a sulphuric acid mass (m a ) of 0.018 kg.
As a result, the discharge capacity value of the rhombohedral structure was 77 matg−1 at room temperature, whereas the orthorhombic one presented a discharge capacity value of only 54 matg−1 at room temperature.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com