Sentence examples for The insulation between from inspiring English sources

Here you are not looking for damage but checking to make sure the insulation between the joists does not block the air flow from the soffit vents.

(One such detail that still baffles roofers, Mr. Schiff said, is that Mr. Williams hid the insulation between the interior's rough-hewed plank ceiling and the roof).

He was happy to leave behind a career and a girlfriend in Toronto in order to find out what would happen "when all the insulation between the world and me was removed".

The coil can generate heat which can cause compressive stress and high temperatures that in turn could fail the insulation between the coil wires.

The amount of charge that can be stored depends on the surface area of the electrodes, the strength and composition of the insulation between them, and how close they are together.

Thermal Barrier Coating (TBC), as the insulation between high-temperature gas and the alloying bodies of gas turbine blades, is adopted for protection and long-term service of gas turbines.

Among them are the geothermal gradient, the bottomhole temperature, the depth of the well, the properties and the flow rate of the selected working fluid, the thermal insulation between the two pipes that compose the heat exchanger (Kujawa et al. 2006; Davis and Michaelides 2009; Bu et al. 2012; Cheng et al. 2013, 2014).

At the same time, when the distance between the cable cores is closer and the insulation material between the cores has a relative dielectric constant up to 4 or 5, the distributed capacitance is greatly increased.

Junction geometry and the properties of the insulation layer between the metal antenna parts play an important role in determining both the time constant and the rectification effectiveness.

The result shows that it is necessary for treating water leakage to fit the insulation layer between the two linings in Kunlun mountain tunnel.

The insulation resistance between adjacent conductors on a bare pcb surface depends on the conductor configuration, the surface resistance of the base material, processing of the board and environmental conditions, particularly temperature, humidity, and contamination.