Sentence examples for Temperature discrepancies from inspiring English sources

The reference point is established using reflection high-energy electron diffraction (RHEED), not the noncongruent temperature used in LEEM where temperature discrepancies up to 25°C against MBE is measured.

Geothermal gradients between the two sets of models (temperature dependent and non-temperature dependent) at times exhibit rather large temperature discrepancies; for example, profile 4 point 9 (80 km along the profile) has up to 50 °C difference in temperature, and in geothermal exploration this is a substantial temperature gap.

However, there are still several concerns about the SSF process, such as the optimum temperature discrepancies between saccharolytic enzymes and fermentation microbes [ 17].

When the temperature discrepancy from the desired temp is more than 4° C then the highest fan intensity is selected.

A method of same temperature discrepancy curve (STDC) is designed to estimate the optimal values (α1)opt and (α2)opt of regularization parameters according to discrepancy principle.

The exergy efficiency of ORC alters by the variation of gas turbine parameters which can be attributed to the variation of temperature discrepancy between gas turbine exhaust temperature and ORC working fluid.

A significant temperature discrepancy exists between the top and bottom surface in each pipe, deteriorated heat transfer occurs on the top surface but enhanced heat transfer happens in the bottom region.

Due to the deviation of fabrication and installation, the detector usually receives the radiation from the different regions of the measuring cavity, so the local effective emissivity distribution is an important parameter to evaluate the measuring temperature discrepancy of a blackbody cavity sensor.

For instance, the temperature discrepancy seen in Taguchi et al. (2012) is a suspicious case in which a systematic bias far larger than 3 K standard deviation may be involved.

Reported mill boiler temperatures discrepancies and the physical characteristics of the ash, highlight the importance of accurate temperature monitoring at the combustion seat if bagasse ash quality is to be prioritised to ensure a usable final ash product.

Also, as ignition response becomes single-stage at higher compressed temperatures, discrepancy from the zero-dimensional simulations reduces.