Sentence examples for Stress at yield from inspiring English sources

However, the deviator stress at yield was largely independent of reorientations of the major principal stress that had occurred during the initial anisotropic consolidation stage of the tests.

The deviator stress at yield was found to vary in a well-defined pattern that depended on the magnitude of the intermediate principal stress parameter.

A significant increase in the tensile modulus and stress at yield and a decrease in strain at yield were observed for both aging temperatures.

Moreover, the adhesion was found to be very high, with a IFSS higher than the substrate bulk shear stress at yield, irrespective of the presence of additives.

The addition of 30 wt% ZnSt produced ductile materials and improved the room temperature tensile modulus by ∼50% and the stress at yield by ∼30%.

An increase in both the Young's modulus and maximum stress at yield was observed compared with the pure polyHIPE from 1.544 ± 0.231 to 4.614 ± 0.775 and 0.177 ± 0.009 to 0.267 ± 0.034 MPa, respectively.

Relationships among molecular weight, Young's modulus, stress, strain at yield, melting and crystallization enthalpy (by differential scanning calorimetry, DSC) and crystallinity (from wide-angle X-ray diffraction, WAXD) were correlated for PPDL samples.

The values of yield stress and strain at yield present a dramatic increase at higher strain rates and decrease with the increase in temperature.

The compressive modulus was calculated from the slope of the linear region after correcting for zero strain, and the compressive strength was identified as the stress at the yield point or 10% strain, whichever occurred first.

The hardening behaviour is defined using plastic strain values, which have zero value at yield stress, corresponding to stress in steel at that particular point.

Close to the end fitting, wires are subjected to tensile stress at 30%to50%0% of yield point.