Sentence examples for Input velocity from inspiring English sources

Specifically, the input velocity model was calibrated to achieve a best match between experimental and numerical ultrasonic traces.

The viscous device input velocities of [50 330] mm/s provide velocity dependent dissipative forces with a maximum of 22 kN at the maximum input velocity.

The accuracy of the methods is assessed by cross comparison and the use of three different flow variables as input: velocity, pressure and heat release rate fluctuations.

This new approach has three advantages: i) the desired trajectory can be set as a continuous and closed loop, ii) the optimal solution can be obtained without the possibility of generating a mechanism with an unintended coupler curve, and iii) the method can take account of the velocity of the output for each section with a constant input velocity.

Parameters included (a) plug-flow and parabolic input velocity profiles, (b) jet exit diameters ranging 2.7 to 7.2 mm for nozzles and 1.8 to 10 mm for tubes, (c) various relative jet gaps, and (d) 14 to 100% H2 in the fuel jet.

The horizontal axis indicates the input velocity ratio, and the vertical axis indicates the slip ratio.

fields by skewing the input velocities.

First, the mapped relations between the velocities of the moving links and the input velocities are discovered; the displacement, velocity, and acceleration of the general redundant hybrid manipulator are derived.

Three cost functions have been investigated: first, the minimization of the total structural power transmitted by the source to the receiver; second, the cancellation of out-of-plane input velocities to the receiver and third the cancellation of out-of-plane input forces to the receiver.

The slip ratios of the tracks are defined as follows: begin{aligned} alpha _r&= 1- frac{v_r'}{v_r},end{aligned} (3) begin{aligned} alpha _l&= 1- frac{v_l'}{v_l}, end{aligned} (4 where (v_r') and (v_r') represent ground velocities, and (v_r) and (v_l) are input velocities that can be measured by encoders.

Fluid flow in the coaxial turbulent jet mixer is defined by two dimensionless parameters: flow velocity ratio R = u i / u o, and the average Reynolds number Re = QD/νA, where u i and u o are input velocities of inner stream and outer stream, Q and ν are total flow rate and kinematic viscosity of the fluid mixture, and D and A are the diameter and cross-sectional area of outer tube, respectively.