Sentence examples for For the slm from inspiring English sources

So does Ahmed Abdel-Shafei, a former colleague who challenged Mr Nur for the SLM chairmanship in the wake of the DPA and now heads the "SLM-Classic".

Table 3 Comparison of at different orders for the SLM approximations when, against the results of [13] for different values when.

Better understanding of the formation mechanisms for these two distinct different structures will help pave the way towards newly designed alloy compositions for the SLM process.

Considering its low CV, this P budget was considered a useful water quality management tool in designing a P removal unit for the SLM.

The gyroid cellular lattice structures with a wide range of volume fraction were made at different orientations, showing it can reduce the constraints in design for the SLM and provide flexibility in selecting optimal manufacturing parameters.

A similar result can be acquired from the calculation results by different research groups on energy density calculation for the SLM fabricated titanium parts, but the appropriate energy density is different due to different materials [7, 22, 28, 47, 48, 49, 50, 51, 52].

Tables 1 3 give a comparison of the SLM results for and at different orders of approximation against the In Table 1, we observe that full convergence of the SLM is achieved by as early as the third order, substantiating the claim that SLM is a very powerful technique.

Tensile monotonic and cyclic stepped symmetric strain-controlled tests on coupons manufactured at 0°, 45°, and 90° build orientations were performed for both the SLM material and for a mill annealed material.

Transmission electron microscopy investigations reveal that Ti grains are refined significantly due to the existence of B. The microhardness, yield stress and compressive strength of the SLM-produced Ti TiB composites increase to 402 Hv, 1103 MPa and 1421 MPa, respectively, compared to 261 Hv, 560 MPa and 1136 MPa, respectively, for the SLM-produced commercially pure Ti.

The calibration of the SLM can easily be scaled for different wavelengths.

For validation, the SLM results were compared to those by Matlab routine and excellent agreement between the results is obtained giving the much needed confidence in using the successive linearization method.