Your English writing platform
Discover LudwigExact(2)
Based upon the measurements made in the heating mode from the 20th of January till 31st of March 2004, the heat extraction rate from the soil is found to be, on average, 57.78 W/m of bore depth, while the required borehole length in metre per kW of capacity is obtained as 11.92.
Based upon the measurements made in the heating mode, the heat extraction rate from the soil, with an average thermal diffusivity of 0.00375 m2/h, was found to be, on average, 11 W/m of bore depth, while the required borehole length in meter per kW of heating capacity was obtained as 14.7.
Similar(58)
Then, bores (3 mm depth, 5 mm diameter) were made using a sterile borer and loaded with a concentration of 5 mg/mL of all samples.
Water wells were bored to a depth of up to 200 m to guarantee water supply, since the forts were supposed to be self-supporting.
The paper describes the performance of the near field rock of HLW packages according to two types of repositories: very long subhorizontal holes with large diameter (1.9 m) bored or blasted at 400-600 m depth, and bored 4 km deep holes with clay/concrete seals in the upper 2 km parts and HLW packages separated by clay/concrete seals in the lower 2 km parts.
Although for deep basin structures at K-NET and KiK-net sites we refer to the J-SHIS model in Japan, the S-wave velocity of the topmost layer in the J-SHIS database at a K-NET site is not always close to the S-wave velocity of the bottommost layer of the boring data since the depth of the K-NET boring is only 20 m at most.
Its floor varies considerably in depth, with bores in Queensland averaging about 1,600 feet (500 metres).
The hole S8 was bored down to the depth of 4 m outside the area surveyed by the ERT.
The hole S9 was bored down to the depth of about 2.5 m in the area of the old ditch now turned into orchard.
While Data's work was technically proficient, it lacked emotional depth and bored the Enterprise crew.
The local inhabitants still use hand tube and dug wells (with hand held pumps that are bored at shallow to medium depth) for their daily water requirements [ 46].
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com