Sentence examples for Applying an impedance from inspiring English sources

This technique can facilitate determination of the choice of criteria used for applying an impedance function in the route finding algorithm.

This study applies an impedance method to determine rail vibration and the grinding instability, such as chatter caused by feed force misalignment and grinding wheel imbalance.

After an initial 3-min run-in period of ventilation with FiO2 = 0.21, tidal volume 8 mL/Kg, respiratory rate 150 breaths/min, and positive end-expiratory pressure (PEEP) = 0 cmH2O, we obtained total respiratory system impedance by applying an 8-second pseudorandom frequency oscillation (0.5-19.75 Hz) to the airway opening.

Winiarski, et al. [29] applied a direct impedance controller and a local stiffness controller to a 7-DOF manipulator to robustly open doors.

The method is applied to an impedance sensor using a half-inch microphone cartridge as a source of volume velocity.

Electrochemical impedance spectroscopy (EIS) was measured with a Solartron Impedance analyzer 1260A by applying an alternating current (AC) voltage of 5 mV in the frequency range from 100 kHz to 0.1 Hz.

(2) Based on well log data (acoustic impedance and sand content), the nonlinear relationship between the sand content and acoustic impedance was obtained by applying a neural network method.

After applying Eq. 3 to the geomagnetic data and the filtered impedances, we apply an inverse Fourier transform to produce an estimation of the geoelectric field as a function of time over the duration of the magnetic storm.

The hydrogen evolution reaction on these electrodes, which in previous investigations using steady-state polarizations, cyclic voltammetry and scanning electron microscopy revealed high surface area and a very heterogeneous surface morphology, has been studied by applying electrochemical impedance spectroscopy (EIS).

This paper investigates an inter-lock method which can improve the performance of rate of change of frequency (ROCOF) by applying system impedance estimation.

A discussion about the impact of an additive such as fluoroethylene carbonate (FEC) in the electrode performance is assisted by applying electrochemical impedance spectroscopy on the electrode/electrolyte interfaces.