Sentence examples for 2 slm from inspiring English sources
It is observed that the gas temperature at 4 slm decreased from 38 to 34 (^{circ })C and from 42 to 38.5 (^{circ })C at 2 slm when the distance increased from 5 to 15 mm.
As observed in this figure, the highest temperature reached 39 (^{circ })C at 1.5 min with a gas flow rate of 2 slm and the lowest temperature reached 29 (^{circ })C at 0.5 min with a flow rate of 5 slm.
Finally, AGE-specific fluorescence determination was performed by measuring emission at 440 nm upon excitation at 370 nm using an Aminco fluorescence spectrometer (Aminco-Bowman Series 2 SLM Instruments. Inc., Rochester, NY) (Monnier and Cerami 1981; Makita et al. 1992).
In the study the following methods have been used: (1) the CAD/CAM Cercon system and the Compartis system (DeguDent, Hanau, Germany) for manufacturing Y-TZP (zirconium oxide stabilized with yttrium oxide) single copings and bridges using a milling technique, (2) SLM for Co-Cr alloy, and (3) the conventional lost-wax technique for the realization of single crowns and bridges in Ni-Cr alloy.
The virtual model was then printed into the 3D implant by SLM using commercially pure titanium Grade 2 (SLM-Solutions, Luebeck, Germany) and an SLM 250HL machine (SLM-Solutions).
The measurement of the ratio of fluorescence were at Ex/Em = 340/510 nm and 380/510 nm (Luminescence Spectrometer, Aminoco-Bowman Series 2, SLM-AMINCO, Rochester, NY, USA) at room temperature.
The films were deposited for different times using mean discharge power of 2.8 W, main argon flow of 1 SLM while the carrier flow (air + HMDSN) was 0.1 SLM.
The flow rate of helium gas was varied from 0.25 sLm to 1.00 sLm.
Sn NCs were synthesized at different He gas flow rates (0.25 sLm, 0.5 sLm, 0.75 sLm and 1 sLm) and collected directly in ethanol; the corresponding transmission electron microscopy (TEM) micrographs are shown in Fig. 2a d.
NCs produced with flow rates at 0.25 sLm, 0.5 sLm, 0.75 sLm and 1.0 sLm resulted in NCs with mean diameters of 6.07, 2.32, 2.18 and 1.60 nm, respectively.
The average size of the NCs at 0.25 sLm, 0.5 sLm, 0.75 sLm and 1.0 sLm was determined by fitting log-normal distributions, which produced mean values of 6.07, 2.32, 2.18 and 1.60 nm, respectively.
