Sentence examples similar to 1 stand off from inspiring English sources

Helio Raimundo Ubisse, 15, stood off to the side of the traveling pop-up clinic.

The situation is not a replica of the 2008-09 stand-off when Desmond was exercised by the decision of the PCC's then chairman, Christopher Meyer, to oust the Daily Express editor, Peter Hill, from the commission following the paper's payment of £550,000 damages to the McCann family.

Table 2 The experimental results for different stand-off distance (argon flow rate = 40 L min−1) Stand-off distance (mm) Porosity (vol%) Micro hardness (Hv0.025) Adhesion strength (MPa) 80 10.61 1000.61.900 11.14 1201.14 12.62.62 35 10.43 140 2.66 35 9.51. Figure 12 shows the graph of adhesion strength and porosity of aluminum coating versus argon flow rate.

Open image in new window Fig. 3 Stand-off screw.

Former Scotland Under-20 stand-off Tommaso Allan, who opted to play senior rugby for Italy, had earlier scored 13 points to give the hosts a healthy half-time lead.

But for the visitors, the irony of being scored against by their own former Under-20 stand-off was only delayed, as Allan picked himself up to put the first points on the board.

AGM-84 Stand-Off Land Attack Missile (SLAM) Manufacturer: Boeing, formerly made by McDonnell-Douglas What it does: Launched from F-18 jets, the SLAM has TV cameras in the nose and can be guided manually once launched against targets on the ground or surface ships.

With the aid of the Image J software, the percents of the porosities are calculated in which for 80, 100, 120 and 140 mm stand-off distances are 1.50, 1.90, 2.62 and 2.66 vol%, respectively.

b The picture of the APS device during deposition Table 1 The parameters of spray Power of plasma, 18 kW Plasma gas flow rate (argon), 25 l/min Gas pressure, 0.3 MPa Powder feed gas flow rate (argon), 15 l/min Stand-off distances, 150, 175, 200 and 225 mm Cooling water rate, 10 l/min Substrate temperature, room temperature.

The material was disintegrated using more passes of a pulsating water jet using flat nozzle, at pressure 40 MPa and stand off distance z = 55 mm.

Open image in new window Fig. 3 XRD pattern of Al coating at a 80, b 100, c 120 and d 140 mm stand-off distance (P = 15 kW and argon flow rate = 40 L min−1).