The major conclusions are: 1) as gap size increases 0.1 mm, the shear stiffness decreases about 1.1%; 2) the shear stiffness quickly becomes zero when the gap radius exceeds the boundary of the highly stressed portion; 3) shim thickness has much greater influence on the bolt stiffness than on the shear stiffness.
Although lesion detection in the temporal lobes may not be a problem (Fig. 4), the image quality will be enhanced if homogeneous B1 would be achieved in the brain by e.g. B1 shimming solutions with multiple RF channels.
The instrument parameters are as follows: (1) the main magnetic field strength is 1.5 T, shimming volume diameter 35 mm ball, SE weighted T1 sequence, TR = 100 ms, TE = 15.5 ms, and FOV 35 × 35 mm; (2) the main magnetic field strength is 1.2 T, shimming volume diameter 60 mm ball, SE weighted T1 sequence, TR = 100 ms, TE = 15.5 ms, and FOV 50 × 60 mm.
The New Yorker, May 19 , 1934P. 14 Shim, 3 years old was supping on a plate of applesauce in which there were some animal crackers.
By E. B. White and S. Hydeman The New Yorker, May 19 , 1934P. 14 Shim, 3 years old was supping on a plate of applesauce in which there were some animal crackers.
STED and PALM technologies can attain better resolution, 50 and 20 nm, respectively (Rust et al. 2006; Shim et al. 2012; Jans et al. 2013).
The effective delayed neutron fractions were found to be 8.39 ± 0.0006 × 10−3 and 8.43 ± 0.0006 × 10−3 for the Al shim tray design and the Zr-4 shim tray design respectively.
The development of solvents is the key to reduce the energy penalty for PCC process (Puxty et al. 2009; Shim et al. 2009).
A final multiplication factor of the Al shim tray design was recorded as 1.00389 ± 0.0006 whilst that of the Zr-4 shim tray design was recorded as 1.00468 ± 0.0006.
In general, students' use of blogs encourages interaction (Deng & Yuen, 2013), collaboration (Ellison & Wu, 2008; Shim & Guo, 2009; Mansouria & Piki, 2016; Zhang, Song, Shen, & Huang, 2014) and cooperation (Zhang et al., 2014).
